Braided Packing   Packing Rings   Gasket   Mechanical Seals   Graphite products   PTFE products   High Temp Fibers   Rubber seals   Machines and Tools 　 Position: SinoSeal > Gasket 　 　   NON-CIRCULAR SPIRAL WOUND GASKET SL NO.: M SERIES 01    02    03     04     Spiral Wound M series are designed and manufactured for boiler manholes and handholes, valve bonnet covers etc. In required shapes and dimensions for service pressure range from 150LB to 2500LB. 1504-M is manufactured with SUS 304 and asbestos paper filler, and 1506-M with SUS316. 1509-M is manufactured with other metals on request.     Other asbestos free types are also available on request. Service Temperature 1504-M: up to 500°C                                        1506-M: up to 580°C   Obround Oval Diamond Square or rectangular   Flange types and suitable gasket types Full face (FF) Raised face (RF) Male & Female (M & F) Tongue & Groove (T & G) with inner and outer ring with inner and outer ring with inner ring Basic type   * The type without an inner ring can be used if the following conditions are fully satisfied.     Filler material: NA or asbestos     Pressure rating: Class 600 or below, or 40K or below.     Size: Nominal diameter 24B or below, or 600A or below.   01    02    03     04       　 Copyright © SinoSeal.com  All Rights Reserved.  TEL: 0086-571-82372789　 82371789 FAX: 0086-571-82376833　 E-mail: info@sinoseal.com ADD: B-901, TAIGU GUANGCHANG, JINCHENGLU 451 HAO, XIAOSHAN,HANGZHOU,ZHEJIANG,CHINA. 浙ICP备05084306号